Polygroup 3000110, Руководство по сборке, Страница: 18 / 37

• D ain, disassemble, and properly store the pool, when the temperature drops below 5ºC.
• Ma e sure the drain plug inside the pool is plugged in place.
• wist off the cap of the drain valve on the outside of the pool.
• ttach a 1.58cm diameter garden hose to the drain valve (from outside to inside).
• Pla e the other end of the garden hose in an area where the water can be safely drained away from the
house and other nearby structures.
• Unplug the inner ap of the to start draining the pool.
• When the ater stops draining, start lifting the pool from the side opposite the drain, leading any remaining
water to the drain and emptying the pool completely.
• Repla e drain cap on outside of pool.
• Rem ve all connecting parts starting from legs and then top ring.
• Be sure that the pool and all parts are ompletely dry before storage. Air dry the liner in the sun until
completely dry before folding).
1. Create a square shape. Starting at one side, fold one-sixth of liner into itself twice. Do the same on the
opposite side (see drawings 2 & 3).
2. Once you have created two opposing folded sides, simply fold one over the other like closing a book (see
drawings 4 & 5).
3. Fold the two long ends to the middle (see drawing 6).
4. Fold one over the other like closing a book, and finally compact the liner (see drawing 7).
P OO L M A I N T E N A N C E & D R A I N AG E
- LEGENDE DR A WINGS -
1
4
2
5
3
6 7
-
1 8
-