Diagram 2A
Diagram 2
Diagram 1A
Assembling .9, 1.5, 2.5 & 3.5 Ton Bulk Bin
The .9 Ton uses 4
–
Leg 2 1/2
”
angles 92
”
long 8
–
Leg Spacers 1 1/4
”
angles 43 1/2
”
long 8-
X Bracing 1
”
flat straps 66
”
long 4
–
Leg Pads 5 X
5 Plate w/tab & 20
–
5/16 x 1
”
hex bolts and nuts.
The 1.5, 2.5, & 3.5 use 4 - Legs 2 1/2
”
an-
gle 92
”
Long, 8
–
Leg Spacers 1 1/4
”
angles 51
”
long , 8-X Bracing 1
”
flat straps 75 1/2
”
long , 4
–
Leg Pads 5 X 5 Plates w/tab & 20- 5/16 X 1
”
hex
bolts and nuts.
Step 1:
Bolt the Leg Pads to the bottom of the legs
using the 3/8 X 1
”
Hex bolts.
Now take 2- Legs and 2
–
Leg Spacers and
2
–
X Brace Straps and make a section like diagram
1, put the angles to the inside of the leg with the
angle up, on the top one and angle down on the bot-
tom one. Put the flat strap on the out side of the leg
angle & use 5 - 5/16 X 1
”
hex bolts to fasten in
place, (finger tighten only). Assemble 2 sections
like this. Now with help stand the two sections up
spaced accordingly facing each other, now add the
leg spacers and X bracing between them just like
Step 1 to form a square.
Now tighten all
bolts.
Cone to Frame .9, 1.5, 2.5 & 3.5 Diagram-2
Step 2:
With the frame assembled drop the cone
into the frame from the top. There are tabs welded
to the legs to bolt the cone into place with. Drill a
5/16
”
hole through the top hole in each tab and bolt
securely using the 5/16 X 1
”
carriage bolts, (bolt
from the inside out). Now drill the remaining holes
and bolt securely using the 5/16 X 1
”
carriage bolts.
These tabs are long enough to reach past the sides
of the cone and down the slope, you will need to
bend this part into the cone and drill and bolt into
place using the 5/16 X 1
”
Carriage bolts again from
the inside out. Diagram 2
Note:
If you are putting together a
(2.5 Bin for
Mineral Concentrate)
or 3.5 Ton Bin you will
need to install the extra support straps. They are 1
”
X 51 1/4
”
long. You will need to put them on the
lowest bolt of the leg tabs. (2 Per Leg) They will
fasten to the slide valve bolts later on in the assem-
bly (Diagram & 2A)
Diagram 1
Diagram 1B
Mineral
Strap
Mineral
Strap
Leg
Pad