Deployment Guide for the Polycom VVX 1500 D Phone
3 - 2
Polycom VVX 1500 D Display
The user could not place a call.
The call was placed using the
incorrect protocol.
Verify that the user isusing a line that is
registered to use the appropriate protocol.
Do the following:
1.
Press the
Menu
key.
2.
Select
Status > Lines
and then
select the line you used to make the
call.
The following figure shows three
registered lines and the protocol used
for each line.
Symptom
Problem
Corrective Action
The time and date are flashing.
You have disconnected the
phone from the network/LAN or
there is no SNTP server
configured.
Do one of the following:
•
Reconnect the phone to the network.
•
Disable the time and date display on
the phone per the instructions below.
1.
Press the
Menu
key, and then select
Settings > Basic > Preferences >
Time & Date
.
The Time & Date screen displays.
Scroll to Disable, and then press
Select
soft key.
2.
Press the
Menu
key again to return to
the idle screen.
The idle screen no longer displays the
time and date.
Symptom
Problem
Corrective Action
Содержание VVX 1500 D
