Polycom SoundPoint IP 550 Скачать руководство пользователя

Страница: 67 / 96

Using the Basic Features of Your SoundPoint

IP 550 Desktop Phone

3 - 21

To disable call forwarding:

From the idle display, press the

Forward

soft key.

.(Optional.) If multiple lines are configured on your phone, select the line
to forward from the list using

and

Using

and

, select the forwarding type you want to change and

then press the

Select

soft key.

Press the

Disable

soft key.

The idle display returns and the regular icon appears as the line indicator.

Dynamic Forwarding

To forward an incoming call to another party:

When the phone rings, press the

Forward

soft key.

Enter a number to forward the incoming call to.

Press the

Enable

soft key.

The incoming call is forwarded to the other party. If call forwarding is

disabled, all future calls will not be forwarded and forwarding will remain

disabled.

Enabling Do Not Disturb

To prevent the phone ringing (from incoming calls), you can select Do Not

Disturb.

Note

This feature is local to the phone, and may be overridden by call server settings.
For more information, contact your system administrator.

Содержание SoundPoint IP 550

































































































Результаты поиска

Содержание SoundPoint IP 550

Отзывы:

Похожие инструкции для SoundPoint IP 550

Бренды по названию

Популярные бренды

Polycom SoundPoint IP 550, Руководство пользователя

Результаты поиска

Содержание SoundPoint IP 550

Отзывы:

Похожие инструкции для SoundPoint IP 550

Бренды по названию

Популярные бренды