Preparations
Obtain the following information from your network administrator:
• RSS2000 unit, Subnet Mask and Default Gateway IP addresses
• Gatekeeper IP address, Prefix, and E.164 of the RSS2000.
Unpacking and Installing the RSS2000
1
Place the RSS2000 unit on a stable flat surface in the selected location.
2
To connect to the power source, insert the power cable into the
Power connector on the rear panel of the MGC+ unit and insert the
Power cable into the power source socket.
3
Connect the lan cable to LAN1 in the back of the system.
4
Turn on the power switch.
DOC2207B RSS2000 V3 0 1 Getting Started Guide + Release Notes
