background image

© 2010 Polycom, Inc. All rights reserved. 

Polycom, Inc.
4750 Willow Road
Pleasanton, CA 94588-2708
USA
No part of this document may be reproduced or transmitted in any form or by any means, electronic or 
mechanical, for any purpose, without the express written permission of Polycom, Inc. Under the law, reproducing 
includes translating into another language or format. 
As between the parties, Polycom, Inc., retains title to and ownership of all proprietary rights with respect to the 
software contained within its products. The software is protected by United States copyright laws and international 
treaty provision. Therefore, you must treat the software like any other copyrighted material (e.g., a book or sound 
recording). 
Every effort has been made to ensure that the information in this manual is accurate. Polycom, Inc., is not 
responsible for printing or clerical errors. Information in this document is subject to change without notice. 

  

ii 

Trademark Information

Polycom®, the Triangles logo, ReadiManager®, SoundPoint®, SoundStation®, ViaVideo®, VoiceStation®, 
Vortex®, and VSX® are registered trademarks of Polycom, Inc. Convene™ , Global Management System™, 
iPower™, MGC™, Content™, People On Content™, Polycom Conference Suite™, Polycom Converged 
Management Application™ (CMA™), Polycom Distributed Media Application™ (DMA™), Polycom HD Voice™, 
Polycom PathNavigator™, Polycom VideoPlus™, Polycom VoicePlus™, PVX™, RAS™, ReadiConvene™, RMX 
2000™, RSS™, V2iU™, VBP™, VS4000™, and VTX™ are trademarks of Polycom, Inc. 
All other trademarks are the property of their respective owners.

Patent Information

The accompanying product is protected by one or more U.S. and foreign patents and/or pending patent 
applications held by Polycom, Inc. 

Содержание PDS 2000

































Отзывы: