Polycom MGC Administrator, Руководство администратора

Страница: 172 / 584

Chapter 3 - Defining Network Services
3-122
Completing the ATM Service Definition
To complete the definition of the ATM network service you need to:
•
Assign the circuit ID to the span of the ATM Network Interface module.
This procedure is described in “Assigning the ATM Network Service to
the ATM Network Interface Module” on page 3-121.
•
Obtain the UNI address of the ATM card installed in the MCU. For more
details, see “Assigning the ATM Network Service to the ATM Network
Interface Module” on page 3-121.
• In the V-Gate application, define the UNI address of the ATM Network
Interface module are installed in the MCU in order to identify the
network.
• Make sure that the UNI address of all endpoints connected to the
network are defined in the V-Gate application and define the missing
ones, if required.
Assigning the ATM Network Service to the ATM Network
Interface Module
In order to connect the MCU to the ATM network (and the V-Gate), you must
configure the ATM Module in conjunction with the ATM Network Services
defined in the MGC Manager. The configuration of the ATM-25 and ATM-
155 Network Interface module is identical for both cards.
To assign the Network Service to the ATM Network Interface module:
1. From the MCU expanded options list, click the plus [+] icon next to the
MCU Configuration icon, or double-click it.
2. Expand the Cards list by clicking the plus [+] icon next to the Cards icon
or double-click the Cards icon.