Polycom KIRK Wireless Server 8000 Installation Guide
3–4
Important Safety Instructions and Product Information
Before using your telephone equipment, you should always follow basic
safety instruction to reduce the risk of fire, electrical shock and injury to
persons, and damage to property.
1
Read and understand all instructions
2
Follow all warnings and instructions including those marked on the
product
3
Unplug this product before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use damp cloth for cleaning
4
Do not install the telephone equipment in the bathroom or near a wash
bowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool
5
The product should be operated only from the type of power source
indicated on the instructions. If you are not sure of the type of power
supply, consult your dealer or local power company.
6
Do not overload wall outlets and extension cords as this can result in fire
or electrical shock.
7
Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short out parts that could
result in fire, electrical shock, or injury. Never spill liquid of any kind into
this product.
8
To reduce the risk of electrical shock or burns, do not disassemble this
product. Opening or removing covers may expose you to dangerous
voltages, dangerous electrical current, or other risks. Incorrect reassemble
can cause electrical shock when the appliance is subsequently used. If the
product need repair, consult your dealer.
9
This product does not support connections to outside plant.
10
Refer servicing to qualified service personnel under the following
conditions:
If liquid has been spilled into the product
If the product has been exposed to rain or water
If the product does not operate normally when following the operating
instructions in the manual. Adjust only those controls that are covered
by the operation instructions. Improper adjustment of other controls
may result in damage and will often require extensive work by
qualified service personnel to restore the product to normal operation.
If the product has been dropped or cabinet has been damaged
If the product exhibits a distinct change in performance
