Configuring KIRK Wireless Server 300
4–3
For information on accessing the web based Administration Page, refer to
“How to Access the Administration Page”
on page 4-1.
This section contains information about:
•
“General Configuration”
on page 4-3
•
“Wireless Server Configuration”
on page 4-4
•
“SIP Configuration”
on page 4-6
General Configuration
On the
Configuration/General
page you define IP, DNS and NTP settings for
the KWS300.
Click
Configuration
, and then click
General
.
Figure 4-2
Adm. Page KWS300: Configuration/General page
Note
The KWS300 is pre-configured to use DHCP. If DHCP is not available, it
will fall back to static (192.168.0.1).
Prior to firmware release PCS05B_, by default, the KWS300 used static IP
address (192.168.0.1).
The current IP Address of the KWS300 can be discovered using UPnP.
Table 4-1
General Configuration of the KWS300
Field
Explanation
Required Optional
General Configuration - IP
Use Static IP
Address
Enable the field. It is possible to configure a
KWS300 using DHCP.
x
