Polycom KIRK 2500, Руководство по установке

Страница: 10 / 40

Polycom KIRK Wireless Server 2500 Installation Guide Installing the KWS2500
8 Polycom, Inc.
Installing the KWS2500 on a Flat Surface
Before you start installation, take notice of the following safety precautions.
Flat Surface Mounting Safety Precautions
• Ensure the surface can support the weight of the unit.
• Never install the KWS2500 on the floor.
• Never place anything on top of the KWS2500. The top plate must be free to
allow sufficient cooling.
To Install the KWS2500 on a Flat Surface
1
Remove the KWS2500 from its package.
2
Before placing the unit, carefully turn it upside down and mount the four
rubber pads supplied in the package. One must be placed at each corner of
the bottom plate.
3
Place it on a clean, flat, horizontal surface.
Installing the KWS2500 on a Wall
Before you start installation, take notice of the following safety precautions.
Wall Mounting Safety Precautions
• Ensure the wall quality is good enough for holding the unit. Avoid
high-porous surfaces, joints and similar.
• Never use countersunk screws.
• Leave at least 10 centimeter of free air above the unit for ventilation.
Connecting the KWS2500 Cables
When the KWS2500 has been mounted, the cables can be connected.
Cable Safety Precautions
Before you connect the cables, ensure to take the following electrical safety
precautions.
• Always use an earthed socket for power.
• Use a power cord with protective earth (PE) connection suitable for the
country where it is being used and with the appropriate local approvals.
• Power supply cables must be connected prior to connecting any interface
cables.