www.polycom.com
Copyright © 2005 Polycom, Inc.
Polycom and the Polycom logo are registered trademarks and
VSX and Polycom Instructor are trademarks of Polycom, Inc.
Windows is a registered trademark of Microsoft Corporation.
1725-22887-001/A
Using the On-screen VSX Controls
To display the on-screen VSX controls, touch the top left
corner of the whiteboard while you are viewing VSX
system screens or the Windows desktop along with the
video conference. The controls let you perform many of
the same functions as the VSX remote control. See
Using Your Polycom Room System for more information
about these functions.
Using Touch Control
Touch control lets you point and touch the screen to
navigate and select.
• When you view the video conference, touch the
screen to select buttons or Directory entries.
• When you view the Windows desktop, using touch
control is similar to using a computer mouse:
All pens and the eraser must be in the tray in order to
use touch control.
Adjusting a Camera
1. Display the on-screen VSX controls, and touch
Near or
Far.
2. Touch the screen in the areas shown to zoom or
move the camera:
To do this...
Point and touch...
Click
Once
Double-click
Twice
Right-click
Once and hold
Annotating Content
You can use the electronic pens to write or draw on shared
Windows desktop or on video from any source other than
your main camera.
• The Windows desktop is shared with all sites as soon
as you pick up a pen. If no computer is attached, the
whiteboard is shared with all sites.
• All sites can see your Windows desktop and
annotations.
• You can use the eraser to remove your annotations.
• The pen or eraser you pick up last is active.
Tips for Using Instructor RP
• To start or stop sharing the Windows desktop during a
call, press the right mouse button.
• When you annotate, leave unused pens and the
eraser in the tray.
• If annotations are slow or fuzzy when you view the
Windows desktop along with the video conference, try
viewing the Windows desktop only.
• If the screen is blank and the lamp standby indicator
blinks slowly, press
to activate the system.
• To save your lamp bulb, press
at the end of your
call to put the system in standby mode.
• If your annotations do not align correctly, pick up a pen
and press the keyboard button. Then, touch the pen to
the cross-hairs on the screen to calibrate the system.
Getting Help
• For help when you share the Windows desktop, click
on the Instructor Tools toolbar.
• For the latest information about using the VSX Series
system, go to www.polycom.com/videodocumentation
and refer to the Using Your Polycom Room System
and the Getting Started Guide for the VSX Series
documents.
Using Your
Polycom Instructor
RP
System
