Polycom DMA 7000, Руководство по началу работы

Страница: 8 / 62

DMA Getting Started Guide
4 Polycom, Inc.
— 1 USB memory stick containing the Polycom DMA USB Configuration
Utility
— 2 crossover Ethernet cables, short and long (not used for single-server
system)
— Your license documents
If you ordered the optional 2-post rack mounting kit, it’s in a separate box.
A two-node system shipment contains a second set of the above items.
5
Examine the contents for damage.
If you find damage, file a claim with the delivery carrier. Polycom is not
responsible for damage sustained during shipment.
6
Remove all of the components from their containers.
7
Install the Polycom DMA server(s) according to the server
documentation. To rack-mount a server, refer to the
Rack Installation
Guide and use the brackets provided.
8
Connect the Polycom DMA server(s) to the network:
a
Connect the GB 1 Ethernet port of each server to the enterprise
network.
b
For a two-node system, connect one of the provided crossover cables
to the GB 2 ports of the two servers.
Don’t turn on the server(s) at this time.
9
Remove the bezel(s) from the server(s).
Configure the Polycom DMA System Server(s)
You configure the Polycom DMA system server(s) using the Polycom DMA
USB Configuration Utility on the USB memory stick.
To configure the Polycom DMA system server(s)
1
Connect the USB memory stick containing the Polycom DMA USB
Configuration Utility to a Windows PC.
To configure the system server(s) without using the USB memory stick, see
“Alternate Procedure: Configure the Polycom DMA System Server(s) Without Using
the USB Stick”
on page 8.