background image

 

 

ME-52 Expansion Amplifier

 

 

———————————————————————————— 

 

           

PO Box 409 Hanover, MD 

  TEL (410) 761-4000 www.polyplanar.com 

 

  

poly-planar

 

       

Marine Audio System 

 

WARRANTY INFORMATION 

This unit is warranted to be free of defects in material and workmanship for a 
period of two years.  Warranty is subject to proper installation and operation 
within the published specifications.  Except as provided below,   Poly-Planar will 
repair or replace, at its discretion, any unit returned prepaid to our facility with 
proper documentation and determined to be defective in normal use.  Poly-
Planar is not liable for any consequential damages. 

 

LIMITS OF LIABILITY 

Proof of date of purchase is required for warranty service of this unit. 

Poly-Planar will consider this warranty void if unit has been tampered with or has 
had serial number altered, defaced or removed. Poly-Planar warranty does not 
cover damage incurred in transit, accident, abuse, misuse, negligence, fire, 
flood, lightning, or unauthorized service.  This warranty assumes no 
responsibility for damages incurred during installation of this equipment.  This 
warranty does not cover labor costs for removal of defective unit or reinstallation 
of replacement unit.  This warranty covers normal consumer use only.  In no 
event shall Poly-Planar be liable for special, incidental, or consequential 
damages. 

To obtain service under this warranty, please call Poly-Planar for a 

RETURN 

AUTHORIZATION NUMBER

.  After a return authorization number is issued, 

return unit with proof of purchase and a letter stating your return address, 
daytime phone number and detail description of the problem or malfunction. 

poly-planar 

Maryland, USA 

(410) 761-4200 

www.polyplanar.com

 

 

 

Содержание ME-52












Отзывы: