VAPORETTO AIRPLUS
19
ENGLI
SH
CORRECT USE OF THE PRODUCT
This appliance is intended for domestic use as a
steam generator, in accordance with the descrip-
tions and instructions contained in this manual.
Please read these instructions carefully and keep
them for future reference.
Polti S.p.A. declines all liability for any damage
or accident deriving from any use of this
appliance which is not in conformity with the
instructions contained in this booklet.
ATTENTION
Directive 2002/96/EC (Waste Electrical and
Electronic Equipment - WEEE): information for
users
This product complies with EU Directive
2002/96/EC.
The crossed-out wastebasket symbol on
the appliance means that at the end of its
useful lifespan, the product must be
disposed of separately from ordinary hou-
sehold wastes.
The user is responsible for delivering the appliance
to an appropriate collection facility at the end of its
useful lifespan.
Appropriate separate collection to permit recycling,
treatment and environmentally compatible disposal
helps prevent negative impact on the environment
and human health and promotes recycling of the
materials making up the product. For more informa-
tion on available collection facilities, contact your
local waste collection service or the shop where
you bought this appliance.
IMPORTANT
Before leaving our factory all our products are rigo-
rously tested. There may, therefore, be water
remaining in the boiler and/or in the deodorant
reservoir of your Vaporetto (
2C
).
PREPARATION FOR USE
• Unscrew the safety cap (
A
) (Fig.1) and fill the
boiler with 1,6 litres of water, using the jug (
10
)
and the funnel (
9
) provided for this purpose
(Fig.2).
WARNING: When filling a hot boiler, we re-
commend adding small amounts of water to
avoid the water evaporating instantly with the
risk of burning.
This appliance has been designed to work with
normal tap water.
However, since water contains limescale by natu-
re, which may cause scaling in the long run, we
recommend using a mixture of 50% tap water
and 50% demineralised water or treated with
water softener systems. If using tap water only,
use the special natural scale removal agent
Kalstop FP2003 to stop limescale from forming.
Absolutely do not use distilled water, dryer
condensate water, perfumed water, rain
water, battery water, water from air conditio-
ning systems and the like. Do not use chemi-
cal substances or detergents.
• Screw the cap
(A)
back in, making sure that it
correctly tightened as far as it will go. If not,
steam could escape from the opening. In this
case turn off the appliance, unplug it from the
mains and wait for it to cool before screwing the
cap back on.
• Open the door of the one-piece socket (
E
); insert
the moulded plug (
3
) until a click is heard (Fig.3).
Make sure that it is firmly connected before pro-
ceeding any further. To release the sheath, sim-
ply press the release keys (
E1
) and at the same
time remove the moulded plug (
3
).
• Plug the power cable (
F
) into a suitable earthed
outlet.
NOTE:
when filling, make sure that the water does
not overflow, to avoid wetting the surface on which
your Vaporella is resting
WARNING: Never leave the filling bottle or the
funnel resting on the mouth of the boiler, with
the product connected to the power supply,
since this could cause burns.
ACCESSORIES COMPARTMENT (H)
The smaller accessories are stored in the compart-
ment
(H)
. To access it, activate the lever
(G)
while
lifting the upper part of the device (Fig.4).
VT AIRPLUS - M0S10981 -
1U06_vers7:FEV 1000-950.qxd
26/06/2014
9.51
Pagina 19
