E
NGLI
S
H
| 23 |
13. TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
If water comes out from the Iron
soleplate instead of steam
The pressure values have not been
reached
Check that the ready steam lamp is OFF indicating
that the Vaporella has reached the right pressure
Wait until the required temperature and pressure
are reached as shown by the indicator lights.
The temperature knob on the iron is
set at the minimum value.
Adjust the temperature knob on the iron to the me-
dium/maximum vaue.
First steam release.
Release onto a cloth until steam comes out from
the holes on the solepate.
Steam does not come out from the
Iron soleplate
ON-OFF button and boiler button off.
Make sure that the appliance is powered and that
the power ON-OFF and boiler button are on
Water tank is empty.
Fill the water tank, as shown in chapter 6 .
Little steam comes from the Iron
soleplate.
The steam regulation knob is set at the
minimum value.
Increase the steam flow by adjusting the steam
regulation knob to the medium/maximum value.
The steam is dry, so is barely visible,
but is present and effective
This is normal especially in particular environmen-
tal conditions.
The appliance does not turn on.
ON/OFF switch turned off.
No power.
Press the ON/OFF switch.
Check that the appliance has been disconnected
from the mains, as indicated in Section 1.
The water tank was filling, but the
steam doesn't come out.
It has not reset the lack of water.
Press the steam button for least 2 second, as
shown in chapter 6
Some water drops are present on
the fabric.
The cover used on the Ironing board is
wet since it cannot withstand the
power of the steam station.
Check that the shaft is suitable (shaft with grille
that prevents condensation).
Presence of water under the
appliance.
Boiler cleaning cap screwed on
incorrectly.
Seal of the boiler cleaning cap
damaged.
Unscrew the boiler cleaning cap and screw it back on
(Chapter 9).
Take Vaporella to an authorised service centre
It was made cleaning CalcControl
but the appliance is doesn't work.
Reset function CalcControl.
Follow the instructions in the point 11.9.
Should the problems persist, contact an Authorised Polti Service Centre (see www.polti.com for the up-to-date list) or
Customer Services.
preliminare VL SILENCE FRIENDLY 14.45-14.55-19.50-19.55 - M0S11301 - 1P09:UNICO
29/09/2015
12.09
Pagina 23
