7.
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
The vacuum cleaner does
not turn on.
No power.
Switch off the main switch.
Check that the appliance is con-
nected to the power as indicated
in Chapter 1.
Turn on the main switch.
The vacuum has
no/reduced suction.
Dust-collector over full.
Adjust the suction power
to the minimum.
Empty the dust collector.
Increase the suction power to the
desired level.
During suction from the ap-
pliance, dust comes out.
Dust collector not inser-
ted correctly.
Dust-collector over full.
Insert the dust collector correctly.
Empty the dust collector.
Should the problems persist, contact an Authorised Polti Service Centre (see www.polti.com
for the up-to-date list) or Customer Services.
E
N
G
LI
SH
| 19 |
FORZASPIRA SE110 - SE115 - 2Q05:FEV 1000-950.qxd
20/05/2016
8.51
Pagina 19
