POLTI LECOLOGICO AS810, Инструкция по эксплуатации, Страница: 11 / 11

TROUBLE CAUSE SOLUTION
The vacuum cleaner does not
start and the thermic protection
intervenes The Hepa filter may be wet Remove the Hepa filter and
leave it to dry
Makes the engine switch off
The intervention of the ther-
mic protection The air outlet filter is not pres-
ent
The air outlet filter is obstrued Put the filter back in its place
Check the condition filter. Re-
place it if necessary.
The vacuum cleaner does not
start Lack of voltage Check cable, plug and socket
The vacuum cleaner switches
off during suction and the four
indicator lights flash The liquid level in the container
is too high
The selected power is too high
for the type of surface
Push the switch (1), disconnect
the supply cable from the mains
and reduce the water in the
container to the indicated level.
Push the switch (1), disconnect
the supply cable from the mains
and keep the appliance discon-
nected for at least 30 seconds
to allow the safety device to re-
set.
The suction power decreases The nozzle, the flexible hose or
the telescopic tube are ob-
structed
The HEPA filter is exhausted.
Clean the filter and take out any
obstructions in the tubes
Replace the filter
Water leaks during suction of
liquids
The float is
obstrued Clean it
The remote control does not
work The battery is probably exhau-
sted Check the battery load and
replace it if necessary
T
T
R
R
O
O
U
U
B
B
L
L
E
E
S
S
H
H
O
O
O
O
T
T
I
I
N
N
G
G
LECOLOGICO AS810
41
E
E
N
N
G
G
L
L
I
I
S
S
H
H
LECOLOGICO AS810 M0S08538 1O09 8 LINGUE:Layout 1 29/09/2008 11.07 Pagina 41