18
RECEIVER OPERATION
Attaching the Antennas
The receiver should always be used with the antennas attached.
Insert an antenna into the antenna input jack on the back of the receiver, and twist the coupling nut a quarter-
turn until secure.
To attach the antennas to the receiver when it’s mounted into an equipment rack (see
Mounting the
Receiver
on page 11).
Auto Lock
The auto-lock feature ensures that the receiver’s setting will not change if the buttons, including the power
button, are accidentally pressed or bumped.
To disengage auto lock, press and hold the set button until the auto-lock icon [ ] turns off. You will be able to
navigate through the settings by pressing the set button repeatedly. Adjust the values with the up and down
buttons [
].
After adjusting the settings values, auto lock engages after 5 seconds of inactivity.
