6
Tripod, Accessory Arm, and Monopod
The shoe-mount microphone clip has a 1/4-20 socket in order
to mount the SCL-1080 on a tripod or accessory with a 1/4-20
screw like an articulating arm, monopod, or selfie stick.
1.
Screw the shoe-mount clip onto the tripod or accessory
until secure.
2.
Make sure the microphone and the handgrip on the clip
are facing forward, and position the microphone with its
controls facing up.
3.
Snap the microphone into the clip at the midpoint of the
microphone, making sure it’s well balanced in the clip. If
necessary, use a coin or a slotted screwdriver to tighten
the bolt on the clip.
CONNECTING THE SCL-1080
TO A C AMERA OR POR TABLE
RECORDER
1.
Insert the locking end of the 3.5 mm cable into the
microphone, and secure it with a clockwise quarter turn.
Insert the other end into your camera or recorder’s 3.5 mm
audio input jack.
2.
Turn the microphone on by sliding the control switch to
Normal or Tele mode.
