8
THE WINDSCREEN
The CS-88A comes with a foam windscreen that helps reduce wind noise. To fit the windscreen onto the
microphone, rotate the windscreen while gently pushing it onto the microphone barrel. Make sure that the
windscreen covers all the ports on the sides of the microphone barrel.
REPL ACING THE SHOCK MOUNT SUSPENDERS
The CS-88A’s integrated shock mount isolates the microphone from your camera or boom pole. This helps
prevent the microphone from picking up vibrations in the camera or the boom, which can cause disruptive and
unwanted noise in your recording.
The CS-88A comes with replacement suspenders for the integrated shock mount. To replace the suspenders,
follow these steps
:
1.
Unhook the two rear suspenders from the microphone, and then unhook the two front suspenders from the
microphone.
2.
Remove the microphone and the old suspenders from the shock mount.
