background image

  Reset

-13-

-15-

Opera�on Procedures 

(From Computer)

  
   1. Connect the printer to the computer: 
   Connect the printer to the computer via 

   Bluetooth/USB, and then install the printer 

   driver on the computer.    

   Driver can be downloaded from the website:
   h�p://www.hprt.com/Downloads.html

Bluetooth connec�on

USB connec�on

-10-

NOTE: 

The MT800 should only be charged through a 
computer USB port using the provided USB 
cable.

2) Choose the setup language “English” and 
click “OK”. 

2. Install Driver: 
1) Double click the driver program.
    

-12-

4) Click “Finish”.

5) A�er installa�on, the icon can be found in
 “Start” → “Devices and Printers”.

4. Print: Open the file to print, choose 
“MT800” for printer device, click “print”.

 
              
    

3. Loading paper: Put the paper into the paper 

inlet in parallel. Printer will feed a distance 
automa�cally a�er it detects the paper. If the 
buzzer sounds once when paper feeding stops, 
it shows that the paper is loaded successfully 

and the printer is ready. 

Paper Inlet

     Don’t pull the paper out forcefully while the 

     printer cover is closed, or it may damage the 

     printer. Please remove the paper as follows.

1. Press the [PUSH] bu�on on both sides of 
the printer at the same �me, then li� the 

printer cover upward.
2. Remove the paper.

Removing Paper

NOTE: 

General Q&A

  

1. What do I do if the power bu�on is not 

responding to touch?

Remove t

he ribbon to access the [Reset] bu�on.

 

Use a toothpick or pin to push down the [Reset] 

bu�on for 2 seconds, power off, and then on 

the printer.

-11-

Note: 

If the printer is turned on and has connected 

to the computer, the driver will be installed 

automa�cally, and this step can be ignored.

3) Choose the matched type and port, and 
click “Next”.

-14-

-16-

-17-

-18-

  

2. Does the printer require thermal paper?

No. The ribbon use thermal transfer, which 

serves the same purpose.

  

3. Does the printer require an ink cartridge?

No, but it requires ribbon. 

 

4. Are there any supplies for the printer?

A ribbon is included, but paper is not.

5. How to purchase the ribbon?

Contact the dealer or our interna�onal sales

person to purchase.

 

6. How many copies can one ribbon print?

About 45 pages – double-sided prin�ng will 

reduce this page count. Note: Double-sided 

prin�ng is not an included printer feature.

  

7. Does the printer have a ba�ery?

which can print up to 70 A4 pages when fully 
charged. It takes 3-4 hours to fully charge the 
ba�ery.

Содержание MT800




















Отзывы: