background image

4

1.2 EC Declaration of Conformity

EC Declaration of Conformity BGP 09-2017

pursuant to the EC Machinery Directive 2006/42/EC

to which this Declaration relates, complies with all applicable provisions of EC Directive 
2006/42/EC – Machinery Directive.
The machine also complies with the provisions of EU Directive 2004/108/EC - Electroma-
gnetic Compatibility - and adheres to the protection objectives of the Low Voltage Directive 
2006/95/EC as per Annex I, no. 1.5.1 of Machinery Directive 2006/42/EC.
The technical documentation exists in full; the operating instructions which belong to the 
machine exist in the original version.

The authorised representative for compiling the technical documentation is:
Development Department, Baugruppentechnik Pollmeier GmbH, Hövelrieger Strasse 26, 
33161 Hövelhof, Germany

Designation:
Type:
Serial number:

Touch to open electric 
glass door lock - EGS1
See product label

Baugruppentechnik Pollmeier GmbH, Hövelrieger Str. 26, 33161 Hövelhof, Germany, 
hereby declares in sole responsibility that the following machine

 

OPERATING INSTRUCTIONS

Touch to open electric glass door lock

Hövelhof, 1 June 2017

Содержание SE EGS1





















Отзывы: