Pollard Brothers Manufacturing 5504 N. Northwest Highway Chicago IL 60630
.
.
.
.
phone
(773)763-6868
fax
(773)763-4466
toll free
(800) 551-5566
After all brackets are in place, make sure stool is square and then, tighten all
screws.
[2]
3
Turn Stool upright. Attach steel stool back to back
braces by inserting (4) ¼” x ¾” Carriage Bolts
through steel back and stool back brace, and fasten
with (4) ¼” Lock Washers, and (4) ¼” Hex Caps.
HAND TIGHTEN ONLY.
Attach Back Braces with Back Rest to Stool Frame
using (4) ¼” x ¾” Hex Head Machine Screws, ¼” Lock
Washers, and ¼” Hex Nuts.
HAND TIGHTEN ONLY.
4
5
6
Square up Back Rest to Frame if needed. Tighten
Carriage Bolts in Steel Back Rest. The Bolt will fit
into the square holes of the back.
Determine the desired height and bolt on the four
adjustable extension legs using (8) ¼” x 5⁄8” Round
Head Machine Screws. ¼” Split Lock Washers and ¼”
Hex Nuts. Tighten and Turn Stool Upright.
Note: If
glides were purchased, you should install them now.