[3]
Attach Door Center Post to Door Jam and
Shelves using (3) 1/4” x 1 1/4” Flat Head
Machine Screws, Hex Nuts, and Lock Washers,
and (3) Nylon Spacers.
Note: Spacers should be
between Center Post and Shelves and Door Jam.
6
7
8
Pull partially assembled Bench to upright
position. Square and level then tighten all
screws.
9
Cabinet Door
Attach T-Handle Locks to Cabinet Doors.
Remove End Screw w/ Sem from Barrel, then
remove Cam and 3/4” Hex Nut. Insert
T-Handle into lock hole and reassemble Hex
Nut, Cam, Sem, and End Screw according to
diagram.
10
Remove drawer from the drawer cover.
Note:
To detach the drawer depress black lever up on
right and down on left slides simultaneously as
you pull the drawer out.
Attach 2” x 2” Butt Hinges to Cabinet Doors
and attach to sides using (16) 1/4” x 5/8”
Round Head Machine Screws, 1/4” Hex Nuts,
and 1/4” Lock Washers.
