Polk Mono UMC1, Инструкция по установке и эксплуатации

Страница: 16 / 19

UMC1
14
BLUETOOTH OPERATION
The UMC1 includes built-in Bluetooth technology that allows you to wirelessly
connect Bluetooth devices to this head unit for streaming audio playback.
About Bluetooth Technology
Bluetooth is a short-range wireless radio protocol. Operating in the 2.4 GHz range,
it transmits voice and data at speeds up to 2.1 Mbit/s over a range of up to 10
meters.
Bluetooth Menu Options
NOTE: Please note that some Bluetooth menu options are only available
while the unit is in Bluetooth Audio mode.
Press and hold the MENU button (2) to enter system settings menu. Rotate the
Encoder Knob (3)
to navigate the menu list to “Bluetooth Setup” and press the
Encoder Knob to access the following Bluetooth Menu options:
•
Bluetooth On/Off : Rotate the Encoder Knob
to choose “BT On” or “BT Off”,
and then press the Encoder Knob button to enter the selection.
•
Bluetooth
– Pair Devices
: Press the Encoder Knob to display
“Pair?” and
press the Encoder Knob again to start pairing mode.
•
Bluetooth
– Paired Devices
: The UMC1 can store up to 5 devices for BT
connection. The devices are stored in FIFO (First in First Out) order. To
prevent a device from being bumped from the list when more than 5 devices
are used, you must lock the device. To Lock/Unlock a device, press the
Encoder Knob button to display/change the Locked or Unlocked icon.
Pairing a Bluetooth Device
Before you begin, consult the owner’s manual for the Bluetooth device you want to
pair with the UMC1.
Bluetooth Quick Pair:
1. On your personal Bluetooth device, enter the Bluetooth settings list. Make
sure your device has Bluetooth turned on and is searching for new devices.
2. Enter Bluetooth mode on the UMC1 by pressing the Mode button and
selecting Bluetooth. Then press the Pairing button (7) to begin Bluetooth
pairing for 120 seconds.
3. On your Bluetooth device, select PA4A/UM2 once it becomes available to
pair and connect your device.
Enter the pairing password (0000), if requested.
Note: You can alternatively pair from the Bluetooth Menu.
Receiving a Call While Listening to Music
When answering a call using a connected phone, Bluetooth audio will pause. After
hanging up from the call, Bluetooth audio will continue on some phones. It may be
necessary to press the play button to resume Bluetooth audio.
Bluetooth Audio (A2DP)
When connected, a Bluetooth enabled device is able to stream audio to the UMC1.
To access Bluetooth mode and play songs stored on your phone, press the Mode
button (9). While in Bluetooth mode, the Bluetooth audio icon illuminates on the
LCD.
Selecting Tracks
During playback, press the |<< or >>| buttons (4, 5) to play the previous or next
track.