15
Using Your TV or Cable/Satellite Remote (IR only)
to Control the MagniFi MAX
The MagniFi MAX is pre-configured to work with most TV remotes /- and
mute function. To teach your remote other functions such as source selection or bass volume
please follow these steps:
1. Enter learn mode by pressing and holding the Source
button on the sound bar until you hear a tone and the
lights on the front of the sound bar pulse left and right.
2. Press and release the button on the MagniFi MAX remote
that you want to learn (ex: Volume Up).
3. Press and release the corresponding button on YOUR remote repeatedly until you hear a two
note ascending tone or see a green LED (success) or a red LED (Fail).
NOTE: Make sure you wait at least 1 second between button presses!
4. Repeat steps 2 and 3 to learn Volume Down, Mute, and Power buttons from your remote.
5. Exit learn mode by pressing and holding the Source button on the sound bar again until you
hear a tone and the lights on the front of the sound bar stop pulsing.
6. Verify that your remote can control the buttons you programmed (ex: Volume up) on the
MagniFi MAX.
IMPORTANT:
Hold both remotes about 12” (30cm) directly in front of the MagniFi MAX when pressing their respective
buttons. Make sure you
wait at least 1 second between button presses.
Make sure your remotes have fresh batteries.
12” (30cm)
NOTE:
•You will hear a different (descending) tone if the command failed to learn. Please try again.
•MagniFi MAX will exit Learn mode after 1 minute of inactivity, saving any learned codes.
