2
P o l k A u d i o C u s t o m I n s t a l l P r o d u c t : M o d e l N u m b e r
Overall Width
14" (35.56cm)
Overall
Height
24-1/4"
(61.6cm)
Depth measured
from the back of the
enclosure to the front
3-3/8" (8.57cm)
LC
i
-RTS
C
Note:
The RTS
C
speaker is designed to be used as a THX
®
center channel speaker. It mounts between studs that are
16" OC (on center).
RTS
C
ENCLOSURE
The enclosure
must be used
for the RTS
C
to perform to THX
®
certified standards.
REMOVING THE CLOTH GRILLE
The RTS
C
’s cloth grille fits tightly to the speaker Baffle.
If you use the cloth grille, take special care when removing it.
Important Note: Never use any tool, such as a paperclip,
to remove the grille, as this could tear the cloth.
Instead, use your hands (after you’ve washed them), grasping
the grille frame near two of its mounting cups and pulling the
frame firmly away from the baffle.
WIRE RECOMMENDATIONS
Runs
Gauge
Lengths up to 25'
18 or 16
Lengths greater than 25'
16 or 14
but less than 50'
Lengths greater than 50'
14 or 12
but less than 75'
Lengths greater than 75'
12
Mount Performance Enclosure using included
hardware. Run wire from any direction and
plug the hole to maintain an airtight seal.
SPECIFICATIONS
LC
i
-RTS
C
Product Weight: 8.75 lbs. (3.97kg)
(not including Performance Enclosure)
Web Address:
For more information on the LC
i
-RTS
C
, log onto
www.polkaudio.com/downloads/manuals/
home/LCi-RTSC_manual.pdf
P E R F O R M A N C E
POWER HANDLING (WATTS/CHANNEL)
10-250W CONTINUOUS
IMPEDANCE (NOMINAL)
4 OHMS
FREQUENCY RESPONSE (OVERALL)
50HZ–27KHZ
THX SPEC
80HZ–26KHZ
EFFICIENCY (2.83V@1M)
92dB
WEIGHT
SPEAKER
8.75 LBS (3.97KG)
PERFORMANCE ENCLOSURE
9.25 LBS (4.25KG)
D R I V E R C O M P L E M E N T
MIDBASS
2-5 1/4" (13.34CM)
AERATED POLYPROPYLENE
DYNAMIC BALANCE
™
DRIVERS
TWEETER
1-1" (2.54CM)
AIMABLE RING RADIATOR TWEETER
C O N N E C T I O N S
SPEAKER WIRE
MAXIMUM WIRE SIZE ACCOMMODATED
12 AWG
MINIMUM RECOMMENDED
18 AWG
INPUT CONNECTORS
HEAVY-DUTY SPRING LOADED
PUSH TERMINALS
