Version 6/2000 Operating instructions for a Wombat
Please find the following correct procedure for the operation of the Polivac Wombat
1.
Plug the cable into a suitable 240 volts earthed power point. Always unwind
the cable completely before commencing vacuuming.
2.
Always ensure the dust bag is empty before commencing vacuuming
3.
Make sure that the power cable in good condition. Ensure that it doesn't get
damaged around sharp objects or in door jambs
4.
Never operate the Polivac Wombat if the power cable is damaged in any way.
5.
Attach the extension wand to the pistol grip and fit the floor tool or any of the
other vacuuming accessories.
6.
Dust bag. Open the lid and ensure that the cloth dust bag is correctly located
and the flexible ring provides a proper seal when the lid is closed for optimum
filtration and maximum hygiene. (Use a paper dust bag in addition to the
standard cloth dust bag. To fit the paper dust bag, insert it into the cloth dust
bag making sure that the cardboard disk is centred on the flexible-sealing ring.
When you replace the lid, the short nozzle in the centre of the lid will be forced
into the central hole of the cardboard disk of the paper dust bag thus providing
a tight seal.)
7.
Ensure that the lid clips are securely fastened.
8.
Power Switch - The power switch is located on the rear base of the Polivac
wombat. Switch it on, and you are ready to go.
9.
If you are using an optional Power Head, attach it to the extension wand
instead of the standard floor tool, and insert the plug the Power Head cable
into the power outlet socket at the top of the front handle grip.
10.
Never vacuum water or liquids.
11.
Empty the dust bag when you have finished vacuuming.
12.
Always wind the cord from the machine end first.
How to Operate a Polivac
Wombat Vacuum Cleaner