2. Lint deflector
Remove screen from channel and remove all lint and dirt build up
3. Oil level
Check once a month.
4. Floor tool
Remove build up of lint from opening of tool.
5. Vac motors
No maintenance can be done but use Antifoam to prevent chemical and water entering motors and causing
faults.
Troubleshooting Fault Remedy
1. No Power to unit
Check power cable and power from source
2. Heater not working
Check pump/heater switch is switched to heater and not pump
3. Pump not working
Check pump/heater switch is switched to pump and not heater check thermal reset button and depress to
engage.
4. No water coming from floor tool
Check pump is running
Check water level is sufficient
Check floor tool jets for blockage
Check water tanks filter for blockage
5. Vac motors not working
Check both switches are on (glowing red)
Check dome lid is on correctly and sealing
Ensure waste dump valve is complete shut
Polivac Warranty
1.
When a warranty repair is justified, Polivac welcomes such repair by any of its authorized Service
Centres. In most instances, the request for warranty brought to the attention of our service
Divisions or Agents are handled in a prompt routine manner with no question of their validity.
However, in some requests for warranty are received which are not justified. In these cases
machine owners will be made aware that the premature failure of their equipment was the
result of abuse, neglect or other cause not covered by Warranty.
2.
The Polivac warranty covers only DEFECTIVE MATERIAL and/or DEFECTIVE WORKMANSHIP. It
does not cover labour.
