Politec SANDOR DUAL SMA, Руководство по установке

Страница: 2 / 24

POLITEC s.r.l. | Sandor Dual Sma manual – Ver. 2.4 2
INDEX
1 COMPONENTS Pag. 3
2 MOUNTING EXAMPLE Pag. 4
 MOUNTING WITH BRACKETS Pag. 5
3 INSTALLATION EXAMPLES Pag. 6
4 CABLE AND CABLING Pag. 7

CONNECTION AND HEATING SETTING
Pag. 8
5 OPTICAL CONFIGURATION Pag. 9
 TX OPTICAL Pag. 9
 RX OPTICAL Pag. 10
6 COLUMN ALIGNEMENT Pag. 11
7 CALIBRATION THRU SMA SYSTEM Pag. 12
8 CALIBRATION WITH PARALLEL BEAMS Pag. 15
9 CALIBRATION WITH CROSSING BEAMS Pag. 16
10 SETTINGS AND PROGRAMMING SCHEDA DUAL TX Pag. 17
DIP SWITCHES DESCRIPTION Pag. 18
CONNECTOR DESCRIPTION & FUNCTIONALITY Pag. 18
11 SETTINGS AND PROGRAMMING DUAL RX Pag. 19
DESCRIPTION DIP SWITCHES Pag. 20
RESPONSE TIME SETTINGS Pag. 20
LED DESCRIPTION Pag. 21
CONNECTOR DESCRIPTION & FUNCTIONALITY Pag. 21
12 TECHNICAL CHARATTERISTICS Pag. 22
Installation recommendation

Verify that the beam tower is fully watertight once the cover and end caps have been correctly filled at the
end of the installation.

Use the cable glands supplied on the tower for all cabling must pass through the lower end cap using the
cable glands supplied. The missed used of proper accessories decrease the IP grade protection of the
tower.

Avoid any type of obstruction between the transmitter and receiver.

Avoid installing the receivers beams in a position where direct sunlight, at the same angle as the receivers
beams, can enter directly into optics especially at sunset and sunrise

Do not install multiple beams where the transmitter beam can interfere with other receiver beams. It is
always better place either transmitter or receivers back to back.