Politec PARVIS WS SMA, Техническое руководство, Страница: 19 / 24

POLITEC s.r.l. | Manual PARVIS WS SMA – Ver. 2.2 19
9)
Exit the function by repressing the ALIGNMENT TEST button for about 3 seconds on both optics (TX-
RX) ensuring that the orange LED TEST is shown in original condition.
10)
When finished, remove the shade that acts as a attenuator, with the certainty of having found the
optimum value.
11)
Once the alignment of all the beams is finished, put in OFF the DIP 10 on the motherboard to
deactivate the programming mode indicated by the LED turns off.
For the next 30 seconds the barrier will sound continuously in case of alignment not effective or
interruption of a beam; correct the orientation of the columns so that the buzzer emits no longer any
sound.
N.B.:
IF TEST LED KEEP FAST FLASHING DURING NORMAL USE OF SYSTEM ANOTHER
INFRARED SOURCE IS DISTURBING (BARRIERS, GATE PHOTOCELL, …) CORRECT
FUNCTIONING OF BARRIER
PULSANTE
DI TEST
LED
ARANCIONE