WORKING WITH INSTRUMENT
1
MAIN ADMINISTRATOR sets OPERATOR access level (see Add Users Group chapter)
Note!
Before start working with the instrument, make sure that:
For PM1610,
РМ1605, PM1300, PM 1904А series instruments
1. Instrument is connected to PC by USB cable (see relevant chapters);
2. Driver for the instrument application type is installed (see
PM1610
Driver Installation
chapter);
For
PM1603/04, PM1208М, PM1621, РМ1703MO-1BT instruments
1. IR channel adapter is connected to PC (internal PC IR adapter can be
used) (see
Connecting/Disconnecting Other Supported Instrument Series
To a PC
chapter).
2. PC communication mode is enabled in the instrument. IR-link between
PC and instrument is activated (see
Connecting/Disconnecting Other
Supported Instrument Series To a PC
chapter).
For PM1610 instruments with RFID function
1. RFID reader is connected to PC (see
Connecting/Disconnecting Other
Supported Instrument Series To a PC
chapter).
2. PC communication mode is enabled in the instrument (see
Connecting/Disconnecting Other Supported Instrument Series To a PC
chapter).
3. Personal Dose Tracker (MySQL) software is running.
Note!
Only system MAIN ADMINISTRATOR or OPERATOR
(according to
the set access level) are allowed to work with the instrument.
Process of working with the instrument includes following:
Assigning/detaching instrument to/from the user;
Reading out the history of the assigned instrument to the user card;
Reading out history of the detached instrument, not saving it into the
program database;
Access to instrument operation settings.
____________________________________________________________________________________
© 2016 Software Guide
www.polimaster.com
102
