background image

1. Introduction 

 
Before using the heater please read this manual carefully. This manual should be always 
situated close to the heater. 
 

Terms of warranty: 

 
WHT heaters have a warranty of 1 year for defects in material or manufacturing. All use, 
placement, maintenance etc. of the heater which is not in accordance with the instructions 
specified in this manual will lead into avoidance of warranty. 
 
 

2. Safety instructions 

 

WHT heaters are manufactured according to the latest level of technical development. 
Improper use of the equipment by untrained personnel may lead to dangerous situations. 
 

  local building regulations must be complied 

  person using the equipment is responsible for safe installation of the equipment and 

electricity 

  equipment must be situated only on a level surface. NOTE! DANGER OF 

CAPSIZING due to high equipment 

  installation of the equipment, water couplings and electricity is allowed only by 

trained professional personnel 

  the equipment should not be placed or used in highly combustible or explosive 

environment 

  the equipment should be placed outside passages, min. 1 m safety area around the 

heater 

  water hoses should be placed and protected to prevent them from being damaged 

  when moving equipment while connected to water circulation one should be very 

careful to avoid unnecessary water damage 

  water hoses must meet the standards for pressurized hoses 

  roll cage and air filter must not be removed 

  equipment can only be used within the specified power limits 

  the guard net for incoming air must be clean and free from any objects 

  filter must be cleaned or replaced regularly 

  discharge opening must not be closed when using the equipment 

  any objects are not to be placed inside the heater 

  the equipment must not be exposed to water jet 

  water leakage inside the equipment must be avoided 

  external electric cables must be protected from damage 

RAMIRENT

Содержание POLAR WHT 45











Отзывы: