Polaroid Snap, Руководство пользователя

Страница: 6 / 53

10 | EN EN | 11
Refilling Photo Paper
When the last ZINK Paper
™
is used, the LED
next to the paper icon on the back of your
Snap will glow red. You can now safely reload
printing paper into your camera.
Paper Do’s & Don’ts
– Do not add more paper if the paper
compartment is not completely empty.
– Do not fill the paper compartment with
more than one 10-pack of Premium
ZINK Paper
™
. Filling over 10 sheets can
damage the printer.
– Do avoid bending the ZINK Paper ™ .
– Do hold the paper by its edges. Avoid
touching the surface with your fingers.
If there is a paper jam, if you insert the
wrong type of paper, or there is some other
printing/paper related error, all indicators
will blink red. Open your camera and correct
the error (clear jam, replace paper, etc.) then
restart your camera.
Memory
Your Snap is built with enough memory to
capture and print one 5MP image at a time.
Inserting an SD Card
Your Snap comes with an SD Card slot for
Your camera will automatically flash and auto
focus for every photo. A lens cap has been
included to keep your lens clean and scratch-
free. Don’t forget to use it!
Printing
The Snap camera instantly prints every photo
for you when ZINK Paper
™
is loaded.
Inserting Photo Paper
1. Slide the latch on the paper tray and open
the door.
2. Slide the entire pack of ZINK Paper ™
into the paper tray.
– Make sure the ZINK Smart Sheet
™
is placed and loaded with the bar code
face down.
– Shiny side of paper faces up.
3. Close the paper tray door.
The ZINK Smart Sheet
™
will eject when you
take a picture, then your photo will print.
For bright, sharp instant photos that come
out dry to the touch and ready to peel and
stick, we recommend Polaroid Premium
ZINK Paper ™ .