Warranty Card
Limited Warranty:
C&A Licensing LLC (”C&A”) warrants this product to the original consumer only and is not
transferable. This warranty covers products that fail to function properly
UNDER NORMAL USAGE
, due to
defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a
period as outlined below (the “Warranty Period”) from your date of purchase. You will be responsible for shipping
the product to C&A or its authorized servicer for warranty support.
Warranty Period
1 year limited warranty:
NON-CARBON FIBER TRIPODS, CARD READERS, CASES, CLEANING ACCESSORIES,
TRIGGER REMOTES, CORDS, FLASH UNITS, LED LIGHTS, BATTERY GRIPS, REPLACEMENT BATTERIES, LENS
EXTENSION TUBES, WATERPROOF ACCESSORIES
5 year limited warranty:
CARBON FIBER TRIPODS, ALL TERRAIN TRIPOD, LENS CAP, WHITE BALANCE CAPS,
CAMERA FILTERS AND LENSES
What is Not Covered by Warranty
All other situations, including but not limited to damages or malfunctions not resulting from defects in material or
workmanship and damages or malfunctions from other than normal use, including but not limited to, repair by
unauthorized parties, tampering, modification or accident.
What To Do When Service Is Required
When returning your defective product (postage pre-paid) for service, your package should include:
1. Copy of original bill of sale
2. A detailed written description of the problem
3. Your return address and telephone number (Daytime)
4. The defective product
5. Mail to: C&A Licensing LLC, 2 Bergen Turnpike, Ridgefield Park, NJ 07660
-You may also visit
www.polaroid.com
for further assistance if necessary or call our technical support
department toll free at 1-800-226-6534
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE, AND
NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL
APPLY AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE, AND NO OTHER EXPRESS
WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE
PRODUCT SHALL BE BINDING ON C&A. THIS WARRANTY IS THE EXCLUSIVE WARRANTY WITH
RESPECT TO THE PRODUCT AND C&A IS THE EXCLUSIVE WARRANTY PROVIDER FOR THE
PRODUCT. REPAIR OR REPLACEMENT IS THE EXCLUSIVE REMEDY OF THE CONSUMER. IN NO
EVENT WILL C&A, ITS MANUFACTURERS, DISTRIBUTORS OR PLR IP HOLDINGS, LLC BE LIABLE FOR
ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH
AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR
RECORDS) RELATED TO THIS PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES
SHALL APPLY. NOTWITHSTANDING THE FOREGOING, CONSUMER’S RECOVERY AGAINST C&A
SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY C&A. THIS WARRANTY
SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE
PRODUCT AND IS NOT TRANSFERABLE.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow
limitations on warranties, so the above limitations or exclusions may not apply to you. This Warranty
gives you specific rights, and you may have other rights, which vary from state to state.
SPECIFICATIONS*
Maximum Depth:
130-ft (40-m)
Waterproofing:
waterproof seal
Construction Materials:
polycarbonate, plate glass, EPDM
rubber,
steel
Filter Diameter:
55-mm
Dimensions (LxWxH):
8.66-in x 6.3-in x 6.3-in
Weight:
1.87-lb
Safe Operating Temperatures:
32°-104°-F (0-40°-C)
*Specifications subject to change without notice
around the seal so the grease is applied evenly.
9 Do not damage the seal when applying the grease.
10 Do not forcibly pull the seal when putting it in the mounting groove.
11 Close the waterproof housing without the camera inside.
12 Submerge the closed housing slowly in a tub, deep sink or large
pail filled with clean water for about 10 seconds. Remove the
housing from the water then place it underwater again for one
minute. Remove it from the water then submerge it yet again for
five minutes. During each submersion, operate the buttons
and
dials.
13 Remove the housing from the water and wipe the exterior with a
soft, dry cloth. Open the housing and inspect the interior for water.
It should be dry. If water has leaked in, determine the cause by
carefully repeating all of the preceding steps in this section.
NOTE:
• When using commercially available anti-condensation products,
the anti-condensation solution should be applied only to the inside
surface of the lens window using a soft, dry cloth. If the solution
comes in contact with any other surface, wipe it off immediately
as it could lead to deterioration of the waterproof housing.
• Never clean the interior of the housing with water. Use only a
clean, soft, dry, and lint-free cloth.
• Do not allow the housing to dry in direct sunlight. This may cause
discoloration of the housing and/or the water seals to degrade.
4 If attached, remove the camera’s grip belt and the optional wrist
or
shoulder
strap.
5 Turn on the camera and change the camera's settings
as
necessary.
6 Check that the image stabilizer is set to “Dynamic.” Refer to
advanced image stabilization in the camera's instruction manual.
7 Check that simultaneous recording is not turned off if you want
to take photos with an aspect ratio of 16:9 while you record movie
clips. Refer to the camera’s instruction manual for procedures on
taking photos while recording movies.
8 Check that the wireless controller is turned on if you want to
access menus and settings while the camera is secured in the
waterproof housing and not in the water. See “Wireless Remote
Control” under the system setup menu in the camera's
instruction
manual.
9 lf necessary, adjust the LCD's brightness. See “Adjusting the
Position and Brightness of the LCD Screen in the camera's
instruction
manual.
10 Turn off the camera before placing it in the waterproof housing.
NOTE:
For important details about the camera's settings and restrictions
while the recording program is set to “underwater” or “surface”,
see the “Power/Others” sections of the specifications in the camera's
instruction manual.
RECORDING MOVIES AND TAKING PHOTOS
After the camera is secured in the waterproof housing, you are ready
to start recording movies and taking photos.
1 Turn on the camera. Refer to Section 6 or 7 for parts locations.
• Press the "POWER" button.
• The ON/OFF charge indicator on the camera will light up green.
2 Make
a
recording
• Press "START/STOP" to begin/end recording a movie.
• Press "PHOTO" to take a photo.
• Use the wrist strap and hold the waterproof housing with
both hands. (For best stability, use the
Polaroid
stabilizer
mount made for this waterproof housing (available from your
Polaroid
retailer).
CHANGING CAMERA SETTINGS WHEN SECURED IN THE
HOUSING
While the camera is out of water and secured in the waterproof
housing, several settings can only be accessed using the camera's
wireless controller. Make sure your hands are dry when you use the
wireless controller.
1 To switch between recording and playback mode, Press and hold
“K” on the wireless controller for more than two seconds.
2 To switch the recording program between “Underwater” and
“Surface”, turn on the camera while holding down the “PHOTO”
button.
STORING THE WATERPROOF HOUSING
1 Keep the waterproof housing open when storing it. This will
prevent the waterproof seals from deforming, ensuring that the
waterproof housing remains waterproof. Keep dust off by enclosing
it open in a plastic bag or plastic kitchen wrap.
2 Do not store the waterproof housing in hot, cold or humid places
or near substances such as naphthalene or insecticides.
3 Do not store the waterproof seals in a place in which they can
accumulate dust or become scratched.
4 If you do not plan to use the waterproof housing for over a month,
remove the waterproof seals and wipe off the grease. To wipe off
the grease, hold a seal between your index finger and thumb and
slide your fingers around the seal. Place the seals in a clean plastic
bag and make sure weight is not placed on them during storage.
Also, make sure it is not twisted when stored.
5 If using the waterproof seals after it has been in storage, make
sure they are not deformed, cracked, or otherwise damaged. If a
seal is damaged, do not use it under any circumstance. Replace it.
REMOVING THE CAMERA FROM THE WATERPROOF
HOUSING
Make sure you wash the exterior of the waterproof housing before
removing the camera.
1 Make sure the Safety Lock Lever and both Lock Buckles remain
securely
latched.
2 Wash the exterior of the waterproof housing in fresh water.
To do this:
• Submerge the waterproof housing in tub of
fresh water (i.e. tap water that is 86°F/
30°C or less).
• Clean the waterproof housing by moving
it back and forth, up and down, and left
and right at least 10 times.
• During the rinsing, operate all the buttons
and
dials.
3 If the waterproof housing was used in salt water, let it soak in fresh
water for several hours to remove salt deposits. If salt deposits
remain on the housing, metal parts may rust and/or push buttons
may become difficult to press.
1. Squeeze at both arrows
2. Pull outward
Push to
close
c) Pull the Safety Lock Release
(located on the right side of the
housing) in the direction of the
arrow
as
shown.
d) Release the Safety Lock Lever.
e) Open the housing.
To close and seal the housing:
a) Close the housing pressing the
housing
halves
together.
b) Using the palm of your hand, press
the
Safety
Lock
Lever toward the
housing until it clicks into its secure
and
locked
position.
c) Fasten the Lock Buckles located
on the center-top and center-
bottom of the housing.
2 Make certain all the buttons, dials,
and zoom lever are operating correctly.
3 If any of the buttons or dials are not
operating correctly, remove the camera
from the housing and secure the camera back in
the housing in a slightly different position.
PREPARING THE CAMERA
1 Set the camera's recording program to “underwater” to ensure
your recordings have natural-looking colors with toned-down blues.
See the special scene recording procedure in the camera's
instruction
manual.
2 Before using the camera underwater, make sure you save your
important recordings to a computer. See saving and sharing your
recordings in the camera's instruction manual.
3 Insert a memory card (if necessary) and attach a fully-charged
battery
pack.
SECURING THE CAMERA IN THE WATERPROOF HOUSING
1 The camera must be secured in the waterproof housing before
recording underwater. Perform the following procedure to secure
the camera properly.
To open the housing:
a) Release the Lock Buckles located on the center-top and center-
bottom of the housing.
b) Open the waterproof housing by first looking for the the word
“OPEN” on the locking lever and squeezing the top and bottom
tabs inward as shown by the two arrows.
3 Turn off the camera
• Press the "POWER" button.
• The "ON/OFF” charge indicator on the camera will go out.
4 Remove the housing from the clean water bath and wipe the
exterior with a clean, soft, dry cloth.
5 Open the waterproof housing and remove the camera.
