14 | OPERATION
Turning the Player ON/OFF
Once the player is fully charged, or connected to an electrical outlet via the AC/DC power adaptor, slide the POWER
switch to turn the player on. The indicator light will glow green. Slide the power switch again to turn it off.
DVD/CD Playback
• Lift the panel on the master unit to open the DVD compartment. Remove protective sheeting from under the disc
cover before first use.
• Place a disc with the playback side facing down and the label facing up and gently push on the center of the disc
to fix it to the spindle. The player will not recognise the disc if it is not inserted correctly.
• Close the disc cover. The disc will begin to play automatically. If this does not occur, press button.
• Pause: Press the button to pause playback. Press again to resume playing.
• Stop: Press the button to stop playback.
• Forward/Rewind: Press the / buttons to fast forward/rewind. Repeat this motion to increase the speed.
Press to resume playing.
• Previous/Next track: Press the / buttons for the previous/next track.
• GOTO: Press the GOTO button and enter a title, chapter, track or time, then press OK.
• PROGRAM: Press to access the programming menu. Use the numeric and navigation buttons to enter the
desired title, chapter or track. Select START at the bottom of the screen to play the programmed sequence.
Select EXIT to cancel programming.
• Other functions such as angle, audio language and subtitles are available depending on the disc format and
content.
