PAIRING INSTRUCTIONS
You need to pair the headphone with your Bluetooth® enabled device (smartphone, tablet, mp3
player, computer, etc.) before enjoying the music wirelessly with the earphone.
Enter in pairingmode
Be sure that the earphone is in power off status first, press and hold the MFB for about 7 to 8
seconds, until red and blue led blink alternately. Then release the MFB button, the unit is now in
paring mode. The headphones emit the voice message "pairing".
Pairingthe earphones with Bluetooth
®
devices
Make the headphones enter into pairing mode (please refer to above section)
Place the Bluetooth® headphone and Bluetooth® device (phone, tablet, music device) at 1 meter
from each other.
Activate the Bluetooth® function on your Bluetooth® device. Please refer to the manufacturer’s
manual for instructions on enabling Bluetooth® on your device.
After searched, select”
PBE111/2/3
” in the device list on the Bluetooth® device.
If a password is asked, enter the “0000” and press”connect” (only some Bluetooth® devices will
ask for a password)
When the connection is successful, the voice message "connected" is heard from headphones
and BLUE LED will quickly flash a few times when pairing is successful.
Please note pairing mode on the headphone will last for around 3 minutes. If no devices are
paired within around 3 minutes the headphone will automatically return to standby mode.
If pairing is unsuccessful, turn off the headphone first and then re-pair again following the above
steps.
Re-connectingto Bluetooth
®
devices
Every time the headphone is switched on, it will connect to the nearest and the last connected
device automatically .
When the headphone is in standby mode and doesn’t connect to any device, short press the MFB
button and it will connect to last connected device automatically.
Note: Headphones can be paired with two devices simultaneously.
LISTEN TO MUSIC
When the headphone is correctly paired with your Bluetooth® device, simply start to play music
on your device and you can enjoy the sound wirelessly in your headphone.
Volume up in music mode:
Short press on ” key. You will hear a beep tone when the
maximum volume level is reached.
Volume down in music mode:
Short press on volume”-” key. You will hear a beep tone when the
minimum volume level is reached.
