Polaroid 545i - Camera Film Back, Руководство пользователя

Страница: 7 / 14

English 7
3 Make the exposure. The
recommended exposure meter
setting is printed on the film
envelope.
4 Push the envelope all the way in
(9). Use moderate pressure, but
don’t force it. If the envelope will
not slide in all the way, withdraw
it slightly and try again.
The exposed film is now ready to
be processed.
down to the metal cap (13). With
your left thumb hold down the
negative and thin paper mask,
and with your right hand quickly
lift off the print (14). It will come
right out of the envelope.
With the exception of Type
55P/N film*, the negative serves no
further purpose. Discard it with
the envelope.
* The Type 59 negative is used for
Image Transfer.
Avoid contact with the chemicals
that remain on the negative. See
Caution notice.
Processing Polaroid
instant films
1 Move the control arm to P (10).
2 Grip the envelope firmly, and pull
it straight, all the way out of the
holder (11). Pull smoothly, at
medium speed, without slowing
down or stopping. You will feel a
slight resistance when the metal
cap reaches the rollers, but continue
pulling without hesitation. The
rollers will separate to allow the cap
to pass through.
3 Wait the recommended
processing time. The film
instructions contain full details.
Temperature affects processing
time; at lower temperatures, the
time must be extended.
4 Remove the picture from the
envelope: Grip both tabs with
your thumbs as shown (12-k).
Roll both flaps back slightly.
Using moderate pressure, tear
the envelope open all the way