Charging the built-in rechargeable battery
The rechargeable battery is built-in. It cannot be dismounted or replaced. It must only be
charged inside the LED safety armband. Never attempt to dismount the rechargeable
battery for the purpose of charging it with an external charger.
Do not throw the rechargeable battery or the product into fire. There is a danger of fire
and explosion!
Never discharge the battery completely, as this could reduce the lifespan of the
rechargeable battery. After use in battery mode, recharge the battery as soon as possible.
Do not store the LED safety armband for longer periods of time while the battery is empty.
If not using the device for a longer period of time, fully charge the battery, and later charge
it every 1-2 months.
Never charge the rechargeable battery of the product unattended.
When charging, place the product on a surface that is not heat-sensitive. It is normal that
a certain amount of heat is generated during charging.
Charge the battery via USB power supply prior to initial use, once the illumination performance reduces
significantly, or if the light cannot be turned on anymore.
3
1
2
4
red = battery is charging
green = battery fully charged
If you turn on the product during charging mode, the charging time will extend.
After charging, fully close the protective cover of the Micro-USB port in order to ensure the
splash-proof feature.
Attach the rubber strap
• Attach the rubber strap to the LED safety armband as
illustrated in the adjacent picture. Proceed the same
way for the other side.
• Use the loose link of the rubber strap to adjust the
width of the rubber strap according to your arm or leg
circumference.
Operation
•
Press and hold the on/off button (1), until the constant light turns on.
•
Press the on/off button repeatedly, both briefly and quickly (within 1.5 seconds), in order to switch colours
(red, green, blue) while in constant light mode.
•
Briefly press the on/off button during constant light mode in order to switch to flashing light mode. The
colour of the flashing light is the same as for the constant light.
•
Press and hold the on/off button during constant light mode or flashing light mode, until the light turns
off.
To switch the colour of the flashing light, turn off the safety armband first. Select the desired
colour during constant light mode, and then switch to flashing light mode.
Cleaning and care
•
Disconnect the product from the USB connection before each cleaning.
•
Never submerge the product in water.
•
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions. Use a dry, soft
cloth for cleaning the product.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
Technical data
Input voltage/current ............................. 5 V/DC, max. 300 mA via USB
Rechargeable battery
........................... 1 x 3.7 V, 300 mAh, LiPo
Charging time
....................................... approx. 3 hours (when the battery is empty)
Operating time
...................................... up to 40 hours
Illuminant
..............................................
2 x RGB-LED
Protection type ...................................... IPX4
Operating conditions
............................. -10 to +40 °C, 30 - 100 % relative humidity
Storage conditions
................................ -10 to +60 °C, 30 - 100 % relative humidity
Dimensions (L x W)
.............................. 18.5 x 3.5 cm
Weight
.................................................. 40 g
Operating instructions
LED safety armband
Item no. 1499879
Intended use
The product is intended for use as signal light to be attached to the arm or leg when jogging, walking or
cycling. Constant and flashing light modes with 3 colours each (red, green, blue) allow for better visibility
during darkness.
The product is splash proof with the protective cover fully closed.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and keep them.
Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• LED safety armband
• Rubber strap
• Micro USB cable
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions from our website
www.conrad.com/downloads
or scan the printed
QR code. Follow the instructions on the website.
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
•
The device is not a toy. Keep it out of the reach of children and pets.
•
Do not leave packaging material lying around carelessly. These may become dangerous
playing material for children.
•
Protect the product from extreme temperatures, strong jolts, flammable gases, vapours and
solvents.
•
Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
-
has been subjected to any serious transport-related stresses.
•
Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
•
Make sure that the Micro-USB cable is not squished, bent, damaged by sharp corners or
otherwise exposed to mechanical stress. Avoid unnecessary thermal load to the Micro-USB
cables such as via excessive heat or cold.
•
Consult an expert when in doubt about operation, safety or connection of the device.
•
Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
•
If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
•
Attention, LED light:
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
•
The LEDs are permanently installed and non-replaceable.
Operating elements
1
3
2
1
On/off button
with battery indicator
2 Micro-USB port with protective cover
3
Recess for attaching the rubber strap (on both sides)
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require
the prior written approval by the editor. Reprinting, also in part, is prohibited. The operating instructions reflect the current
technical specifications at time of print.
© Copyright 2016 by CEI Conrad Electronic International (HK) Limited
*1499879_V1_1216_02_LS_m_en
Distributed by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
