Polaris WideTrak Скачать руководство пользователя страница 51

Страница: 51 / 150

THE PERFECT FIT

Accessories

Polaris offers a wide range of accessories for your snowmobile. From

map light to electric start, Polaris has the accessories that will help

make each ride more enjoyable. See your dealer for a list of

accessories.

NOTE:

The accessory tether switch is available for all models.

Order PN 2870668.

Use only Polaris parts and accessories on your Polaris snowmobile.

Use of unapproved parts and accessories may result in:

Non-compliance with government/industry requirements

Voiding of warranty

Personal injury to self or others

This applies to, but is not limited to the following areas: brakes,

clutches, fuel systems, and exhaust systems.

NOTE:

Exhaust systems are critical safety areas that

must

use

approved Polaris parts. Please see your Polaris dealer for

service.

Содержание WideTrak























































































































































Результаты поиска

Содержание WideTrak

Отзывы:

Похожие инструкции для WideTrak

Бренды по названию

Популярные бренды

Polaris WideTrak, Руководство владельца по обслуживанию и безопасности

Результаты поиска

Содержание WideTrak

Отзывы:

Похожие инструкции для WideTrak

Бренды по названию

Популярные бренды