Polaris Timbersled ST 93 RIPPER 2019, Руководство пользователя

Страница: 35 / 84

MAINTENANCE
HOST BIKE MAINTENANCE
For host bike maintenance procedures and recommendations, refer to your host
bike’s owner’s manual. The maintenance information found in the manual only
applies to the Timbersled Snow Bike system.
TIMBERSLED RECOMMENDED MAINTENANCE
PROGRAM
Always follow recommended regular maintenance and perform service checks
as outlined in this manual. Record maintenance and service in the Maintenance
Log.
The recommended maintenance schedule on your vehicle calls for service and
maintenance inspections at 150 miles (240 km), 500 miles (800 km) and 1000
miles (1600 km). These inspections should be performed by a qualified service
technician. For continued optimum performance and component life, continue
maintenance checks at 1000 mile (1600 km) intervals.
All necessary replacement parts and labor incurred, with the exception of
authorized warranty repairs, become the responsibility of the registered owner.
If, during the course of the warranty period, part failures occur as a result of
owner neglect in performing recommended regular maintenance, the cost of
repairs are the responsibility of the owner.
Personal safety is critical when attempting to service or make adjustments to
your vehicle. If you're not familiar with safe service or adjustment procedures
and the use of tools, or if you don't feel comfortable performing these tasks
yourself, your authorized Timbersled dealer can provide any needed service.
NOTICE
Hot components can cause damage to plastic. Always make sure the exhaust
system and engine have cooled before tipping the vehicle on its side for
service or inspection.
NOTE
Timbersled recommends changing the oil in your host bike more frequently
that stated in the host bike’s owners manual.
33
MAINTENANCE