Polaris Timbersled ST 93 RIPPER 2019, Руководство пользователя

Страница: 31 / 84

OPERATION
BREAK-IN PERIOD
SNOW BIKE SYSTEM BREAK-IN
Break-in Function Engine Run
Time Description
Chain: Drive and Chain Case 3 hours Lubricate
Chain (Drive and Chain Case)
Deflection 3 hours
Check Tension
Brake Line Connections 3 hours Check for leaks
Track Tension 3 hours Check Tension
Swing Arm Bolt 3 hours Re-Torque
Strut Rod Bolts 3 hours Re-Torque
Front Axle 3 hours Re-Torque
Ski Bolt 3 hours Re-Torque
Drive with extra caution during the break-in period. Perform regular checks on
fluid levels, lines, and all other important areas of the snow bike.
TRACK WARM-UP
WARNING
A loose track or flying debris could cause serious injury or death. Stand clear of
the front of the snow bike and the moving track. Never hold the snow bike off
the ground or stand behind it while warming up the track. Do not use excessive
throttle during warm-up or when the track is free-hanging. Use a stable rear
support.
29
OPERATION