Polaris Sportsman Touring 570 EPS 2021 Скачать руководство пользователя страница 24

Страница: 24 / 186

OPERATING ON FROZEN BODIES OF WATER

Never operate the Tractor on a frozen body of water.

HANDLING GASOLINE

Gasoline is highly flammable and explosive under certain conditions.

• Always exercise extreme caution whenever handling gasoline.
• Always refuel with the engine stopped, and outdoors or in a well ventilated

area.

• Do not smoke or allow open flames or sparks in or near the area where

refueling is performed or where gasoline is stored.

• Do not overfill the tank. Do not fill the tank neck.
• If gasoline spills on your skin or clothing, immediately wash it off with soap

and water and change clothing.

STALLING WHILE CLIMBING A HILL

Stalling, rolling backwards or improperly
dismounting while climbing a hill could cause
a rollover.

• Always maintain a steady speed when

climbing a hill.

• Always engage ADC mode (if equipped)

before ascending or descending a hill. If
ADC mode is not equipped, apply AWD
mode before ascending or descending a
hill.

If all forward speed is lost:

• Lean forward to keep body weight uphill. A passenger should also lean uphill.
• Apply the brakes.
• Lock the parking brake when fully stopped.
• Dismount on the uphill side of the vehicle, or on the left if the vehicle is

pointing straight uphill. Have a passenger dismount first, then the operator
may dismount.

• Turn the ATV around and remount, following the procedure described in the

owner's manual.

If the ATV begins rolling downhill:

• Keep operator and passenger body weight uphill.
• Never apply engine power.

SAFETY

Downloaded from

ManualsNet.com

search engine

Содержание Sportsman Touring 570 EPS 2021



























































































































































































Результаты поиска

Содержание Sportsman Touring 570 EPS 2021

Отзывы:

Бренды по названию

Популярные бренды

Polaris Sportsman Touring 570 EPS 2021, Руководство пользователя

Результаты поиска

Содержание Sportsman Touring 570 EPS 2021

Отзывы:

Бренды по названию

Популярные бренды