background image

131

TROUBLESHOOTING

Drive Belt Wear/Burn

Possible Cause

Solution

Driving onto a pickup or 
tall trailer in high range

Use low range during loading.

Starting out going up a 
steep incline

Use low range. See warnings on page 58.

Driving at low RPM or 
ground speed (3-7 MPH)

Drive at a higher speed or use low range more frequently.

Insufficient warm-up at 
low ambient tempera-
tures

Warm the engine at least 5 minutes. With the transmission 
in neutral, advance the throttle to about 1/8 throttle in 
short bursts, 5 to 7 times. The belt will become more flex-
ible and prevent belt burning.

Slow/easy clutch engage-
ment

Use the throttle quickly and effectively.

Towing/pushing at low 
RPM/low ground speed

Use low range only.

Utility use/plowing

Use low range only.

Stuck in mud or snow

Shift the transmission to low range and carefully use fast, 
aggressive throttle application to engage clutch. 

WARNING

: Excessive throttle may cause loss of control 

and vehicle rollover.

Climbing over large 
objects from a stopped 
position

Shift the transmission to low range and carefully use fast, 
brief, aggressive throttle application to engage clutch.

WARNING

: Excessive throttle may cause loss of control 

and vehicle rollover.

Belt slippage from water 
or snow ingestion into the 
PVT system

Dry out the PVT (see page 101). Prevent water from 
entering the PVT intake duct (see page 103). Inspect 
clutch seals for damage if repeated leaking occurs.

Clutch malfunction

See your POLARIS dealer.

Poor engine performance

Check for fouled plug or foreign material in gas tank or 
fuel lines. See your POLARIS dealer.

Slippage from failure to 
warm up belt

Always warm up the belt by operating below 30 mph for 
one mile (5 miles or more when temperature is below 
freezing).

Wrong or missing belt

Install the recommended belt.

Improper break-in

Always break in a new belt and/or clutch. See page 46.

Содержание SPORTSMAN ACE 2014
























































































































































Отзывы: