Polaris Sportsman 800 EFI Скачать руководство пользователя

Страница: 22 / 149

SAFETY

Rider Safety

WARNING

POTENTIAL HAZARD
Operating this ATV on public streets,

roads or highways.
WHAT CAN HAPPEN
The ATV could collide with another

vehicle.
HOW TO AVOID THE HAZARD
Never operate the ATV on any public

street, road or highway, including dirt and

gravel roads. In many states it's illegal to

operate ATVs on public streets, roads

and highways.

WARNING

POTENTIAL HAZARD
Riding an ATV without wearing an

approved helmet, eye protection and

protective clothing.
WHAT CAN HAPPEN
Riding an ATV without an approved

helmet increases the risk of a severe head

injury or death in the event of an accident.
Riding without eye protection could result

in an accident and could increase the

chance of a severe injury in the event of

an accident.
HOW TO AVOID THE HAZARD
Always be sure operator and passenger wear an approved helmet that fits

properly. A passenger's helmet should have a rigid chin guard.
Always be sure operator and passenger wear eye protection (goggles or face

shield), gloves, boots, a long-sleeved shirt or jacket, and long pants.

Содержание Sportsman 800 EFI






















































































































































Результаты поиска

Содержание Sportsman 800 EFI

Отзывы:

Похожие инструкции для Sportsman 800 EFI

Бренды по названию

Популярные бренды

Polaris Sportsman 800 EFI, Руководство пользователя

Результаты поиска

Содержание Sportsman 800 EFI

Отзывы:

Похожие инструкции для Sportsman 800 EFI

Бренды по названию

Популярные бренды