Polaris Shademaker Astral-TC Series, Руководство пользователя

Страница: 5 / 8

4 3
1. Internal Stem 8. Long Arm
2. Acetal Ring 9. Short Arm
3. Locking Screws 10. Arm Strop (Hinge)
4. Crank Handle 11. Arm End Fitting
5. Pole 12. Canopy
6. Hub (Lower) 13. Strut
7. Hub (Upper)
*Adapter Plate A included and only to be used with mount kits. Free
standing BC05M steel base frames do not need adapter plate slots to
square up with umbrella.
1
2
3
4
5
7
6
8 9
10
11
13
12
D I A G R A M & L E G E N D
I N S T A L L A T I O N O P T I O N S A N D G U I D E L I N E S
There are three standard installation options which provide the best stability for the
Astral-TC. Depending on your situation, you will have requested one or more of the
Astral-TC Mounting Kits at the time of your order. Either the Concrete Mount Kit, or the In-
Ground Fitting Mount Kit.
1. CONCRETE MOUNT KIT
- This kit includes a base plate, four (4) plate bolts, and
one (1) allen wrench. Recommend installation by a licensed contractor.
2. IN-GROUND MOUNT KIT
- This kit includes in-ground fitting, four (4) plate bolts,
and one (1) allen wrench. Recommend installation by a licensed contractor.
3. FREE STANDING STEEL FRAME
- You may opt to use a free standing base for
your Polaris umbrella. We recommend a minimum of a 400-700lbs. base weight for
this umbrella (depending on the size of your umbrella).
NOTE:
If using a free-standing
steel frame, wind guidelines change from light to moderate winds to light winds only.
NOTE: REFER TO BASE WEIGHT GUIDE AND A SEPARATE
MANUAL FOR BASE ASSEMBLY PRIOR TO PROCEEDING.
A S S E M B L Y I N S T R U C T I O N S
Two-person team is recommended for assembly.
By now, you have installed your adapter plate A (if using a mount kit or steel base
plate), or have set up your steel frame base.
Remove all packaging material from under canopy. Lift complete umbrella and install
onto adapter plate A or steel frame. Bolt umbrella to adapter plate to secure umbrella in
place.
You are now ready to operate your umbrella!