Polaris RZR XP 4 TURBO S VELOCITY 2019 Скачать руководство пользователя страница 90

Страница: 90 / 222

DRIVING WITH PASSENGERS

1. Complete the steps in the New Operator Driving Procedures section.

2. Perform the pre-ride inspection.

3. Do not carry more than one passenger in a 2-seat vehicle. Do not carry more

than three passengers in a 4-seat vehicle. Additional passengers can affect
the operator’s ability to steer and operate the controls.

4. All riders must be able to sit with backs against the seat, both feet flat on the

floor and both hands on the steering wheel (if driving) or on a passenger
hand hold.

5. The driver and all passengers must wear helmet, eye protection, gloves,

long-sleeve shirt, long pants, over-the-ankle boots and seat belt at all times.
See the Safe Riding Gear section for details.

6. Always make sure all cab doors are closed and latched when riding in this

vehicle.

7. Allow a passenger to ride only in a passenger seat.

8. Slow down. Always travel at a speed appropriate for your skills, your

passengers’ skills and operating conditions. Avoid unexpected or aggressive
maneuvers that could cause discomfort or injury to a passenger.

9. Vehicle handling may change with passengers and/or cargo on board. Allow

more time and distance for braking.

10. Always follow all operating guidelines as outlined on safety labels and in this

manual.

OPERATION

Содержание RZR XP 4 TURBO S VELOCITY 2019































































































































































































































Результаты поиска

Содержание RZR XP 4 TURBO S VELOCITY 2019

Отзывы:

Похожие инструкции для RZR XP 4 TURBO S VELOCITY 2019

Бренды по названию

Популярные бренды

Polaris RZR XP 4 TURBO S VELOCITY 2019, Руководство владельца по обслуживанию и безопасности

Результаты поиска

Содержание RZR XP 4 TURBO S VELOCITY 2019

Отзывы:

Похожие инструкции для RZR XP 4 TURBO S VELOCITY 2019

Бренды по названию

Популярные бренды