• Enable your Bluetooth® tethering in your phone's settings. Tap instruction for
more information of how to enable tethering on an iPhone or Android phone.
• Connect your phone via Bluetooth®. If you phone is currently connected you
MUST disconnect and reconnect it.
• Press the
login
button to login to your Ride Command account. If you do not
have a ride command account, sign up at
ridecommand.polaris.com
NOTE
Once you've completed all three steps above, your information will be stored
(unless cleared manually) and you will not need to login again into your Ride
Command account for future group rides.
4. Press the back button to go back to the group ride screen and join your
Group Ride.
NOTE
In order for vehicles with a V2V antenna and vehicles using mobile phone
based group ride to join the same group, at least one member of the group
must be connected to both the V2V antenna and the mobile phone based
group ride.
VEHICLE TO VEHICLE (V2V) ANTENNA
If your vehicle is equipped with a V2V antenna, use the following procedure to
setup Group Ride:
1. From the map menu,
tap the
Group Ride
button.
2. Tap
Setup V2V Group
Ride
button on the
display screen.
3. Tap the
Antenna
Installed
toggle switch
to the
Yes
position.
32