manualshive.com logo in svg

Polaris RANGER XP 900, Руководство владельца по обслуживанию и безопасности

Поделиться
Скачать
Polaris RANGER XP 900 Скачать руководство пользователя страница 117

115

MAINTENANCE

Cleaning and Storage

Washing the Vehicle

Keeping your POLARIS vehicle clean will not only improve its appear-
ance but it can also extend the life of various components.

NOTICE:

Water in the PVT system 
could cause the drive belt 
to become wet and slip in 
the clutches. Always avoid 
spraying water directly 
toward any intake pre-
filters.

High water pressure may 
damage components. 
POLARIS recommends 
washing the vehicle by 
hand or with a garden hose, 
using mild soap. 

Certain products, including insect repellents and chemicals, will 
damage plastic surfaces. Do not allow these types of products to 
contact the vehicle.

The best and safest way to clean your POLARIS vehicle is with a gar-
den hose and a pail of mild soap and water. 

1. Use a professional-type washing cloth, cleaning the upper body first 

and the lower parts last.

2. Rinse with clean water frequently.

3. Dry surfaces with a chamois to prevent water spots.

Washing Tips

• Avoid the use of harsh cleaners, which can scratch the finish.
• Do not use a power washer to clean the vehicle.
• Do not use medium to heavy duty compounds on the finish.
• Always use clean cloths and pads for cleaning and polishing. Old or 

reused cloths and pads may contain dirt particles that will scratch the 
finish.

PVT Intake Pre-Filter

Содержание RANGER XP 900




















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды