Polaris RANGER XP 1000 2018-2019 Скачать руководство пользователя страница 261

Страница: 261 / 561

9929399 R01 - 2018-2019

RANGER

XP/ CREW 900/1000 Service Manual

4.33

9. Carefully pull up on the fuel rail and injectors and

remove them from the intake plenum as an assembly.
Take care not to damage the fuel injector ends during
removal.

10. Pull out on the fuel injector retaining clip and pull the

injector out of the fuel rail. Repeat on the other
injector if removal is necessary.

11. Upon installation of the new fuel injectors, lightly

lubricate the injector O-rings to aid installation.

12. Install the new injector(s) into the fuel rail and reinstall

the retaining clip.

NOTICE

Be sure the retaining clip is positioned on the injector

and fuel rail as shown above.

13. Thoroughly clean the area around the fuel injector

ports on the intake plenum.

14. Lightly lubricate the injector O-rings and reinstall the

fuel rail / injector assembly into the intake plenum.

15. Install the fuel rail mounting screws and torque to

specification.

TORQUE

Fuel Rail Mounting Screws:

7 lb-ft (10 Nm)

16. Reinstall the fuel line to the fuel rail.

17. Connect the harness leads to the fuel injectors.

NOTICE

Be sure to connect the PTO harness lead to the PTO

injector and the MAG harness lead to the MAG injector

to ensure proper engine operation.

18. Reconnect the negative battery cable and reinstall

the storage bin and passenger seat base.

19. Turn the key to the on position and wait for fuel pump

to prime the fuel system.

20. Start the engine briefly and inspect the fuel rail and

injectors for fuel leaks.

FUEL SYSTEM

Содержание RANGER XP 1000 2018-2019


















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RANGER XP 1000 2018-2019

Отзывы:

Похожие инструкции для RANGER XP 1000 2018-2019

Бренды по названию

Популярные бренды

Polaris RANGER XP 1000 2018-2019, Руководство по обслуживанию

Результаты поиска

Содержание RANGER XP 1000 2018-2019

Отзывы:

Похожие инструкции для RANGER XP 1000 2018-2019

Бренды по названию

Популярные бренды